Part Number Hot Search : 
WTS882 B800015 120SI SMP08 ST72321 MIC502BN 00028 01100
Product Description
Full Text Search
 

To Download HAC500P Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 H HiTRON
03/29/2008
UNIVERSAL AC INPUT HARMONIC CORRECTION AC-DC HOT-SWAP CompactPCI QUAD OUTPUT 500 WATTS ACTIVE CURRENT SHARING SWITCHING POWER SUPPLIES HAC500P SERIES
FEATURES:
500W 6U X 8HP EUROCARD PACKAGE MEET IEC 61000-3-2 HARMONIC CORRECTION INTERNAL OR-ING DIODES FOR N+1 REDUNDANCY HOT-SWAPPABLE THIRD-WIRE CURRENT SHARING EMI MEET EN 55022 / CLASS A CE MARKING COMPLIANCE FULLY COMPLIANT WITH PICMG
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac. Input On/Off switch: Option. Power Factor Correction: Meet Harmonic Correction IEC 61000-3-2.Power Factor typ. 0.99. Input Connector: Positronic 47-pin PCIH47M400A1. Input Frequency: 47-63Hz. Inrush Current: 30.6A(rms) @ 230Vac. Input Current: 5.1A@115Vac/2.6A @230Vac. Dielectric Withstand: Meet IEC 60950-1 regulation. Transient Protection: MOV withstands transient as specified by EN 61000-4-4 level 3. EMI: Meet EN 55022 Class A. Hold-up Time: 22.4mS @ 115Vac,34mS @ 230Vac. Remote ON/OFF: Available at [INH#] & [EN#] pins. Power Fail Signal: Available at [FAL#] pin. Status LED: means valid input voltage. means a critical fault. Thermal Protection (OTP): Installed NTC and thermostat for thermal sensor at [DEG#] pin. Leakage Current: Typ. 0.7mA @ 230Vac.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Power: Typ. 500W continuous. Output Connector: Positronic 47-pin PCIH47M400A1. Line Regulation: Typ. 0.1%. Load Regulation: VO1 & VO2 typ. 0.5%. VO3 typ. 1.0%, VO4 typ. 3.0%. Noise & Ripple: Typ. 1% peak-peak or 50mV, whichever is greater. OVP: Built-in at all outputs. Adjustability: Available at VO1,2,3 & 4. Output Trim: Electrical trim available at VO1/2. [ADJ #]. Remote Sensing: Available at VO1,VO2 & VO3. Hot-Swap: Available. N+1 Redundancy: Installed with internal OR-ing diodes at all outputs and third-wire current sharing method for N+1 redundancy operation. Current Sharing: Third-wire current sharing at VO1,2 & 3. DC OK Signal: Available for all outputs. Power OK Signal: Available for all outputs. Over Current Protection (OCP): Installed at each rail. Overload Protection (OLP): Fully protected against output overload or short circuit. Typ. 120-130% max. load. Consult the factory for special OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 77-80 %. Switching Frequency: 120K Hz. Circuit Topology: Forward circuit. Transient Response: Peak transient less than 250mV and returns to within 1% less than 0.5ms for 50% load-change. Safety Standard: IEC 60950-1 Class I. Construction: Eurocard 6U X 8HP X 160mm CompactPCI format. Front Panel with Extractor handle. Operating Temperature: -30 to +50 C at full load with specified air flow. Derates linearly to 50% at +70 C. Storage Temperature: -30 to +85 C. Temperature Coefficient: Typ. 0.04% / C. Cooling: At least 800LFM moving air is required to achieve full rating power 500W in a confined area. Power Density: 5.0 Watts/ Cubic Inch.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
Hitron Electronics Cororation. B4-11, P.O. Box 26-110 Kaohsiung Export Processing Zone Kaohsiung 806 Taiwan TEL: 886-7-8210410/FAX: 886-7-8419917, 886-7-8210511/E-mail: sales@hitron-e.com/8210511@seed.net.tw /Web-site: www.hitron-e.com
For the details of safety approval, please consult the factory.
1
OUTPUT VOLTAGE / CURRENT RATINGS CHART
QUAD OUTPUT
MAIN +VO1 @# MODEL NO. Min. HAC500P-490 4A Typ. 50A Volt. +5V Max. 60A Min. 0A Typ. Volt. Max. Min. Typ. Volt. Max. Pk. Min. Typ. Volt. Max. Pk. 0A 10A +12V 14A 15A 0A 3A -12V 4A 5A AUX. +VO2 @# AUX. +VO3 #@ AUX. -VO4 @
30A +3.3V 60A
Symbol: "" OVP built-in. "@" Adjustable. "#" Remote sensing. "" 3rd-wire Load Sharing. "" Installed with Or-ing diode. "" Magnetic Amplifier. "" Installed with Post-regulator. . Remark: Peak load less than 60sec. with duty cycle <10%. Max. load is the continuous operating load of each rail. But the max. load of each rail can't be drawn from all outputs at the same time.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 1.7kg (3.75 lb.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT LNG 47 46 45 QUAD OUTPUT VO1 S+ S- Adj. C.S. 1,2, 3,4 30 34 29 35 VO2 13,14, 15,16, 17,18 S+ Adj. C.S. VO3 33 32 41 20 STATUS/CONTROL S+ C.S VO4 DC COM EN# DEG# INH# FAL# 5,6,7,8,9, 36 44 21 10,11,12, 27 38 39 42 19,24
ASSIGNMENT CNTR &PIN #
Mating connector: PCIH47F400A1.
Hitron Electronics Cororation. B4-11, P.O. Box 26-110 Kaohsiung Export Processing Zone Kaohsiung 806 Taiwan TEL: 886-7-8210410/FAX: 886-7-8419917, 886-7-8210511/E-mail: sales@hitron-e.com/8210511@seed.net.tw /Web-site: www.hitron-e.com
2


▲Up To Search▲   

 
Price & Availability of HAC500P

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X